Logo
0 items
za
Your shopping cart is empty
Potrebujete poradiť? Neváhajte nás kontaktovať.
  1. Úvod
  2. Thermostats
  3. Controllers / Regulators
  4. Thermostat EUROSTER 813 for solar systems

Thermostat EUROSTER 813 for solar systems

Euroster 813 Euroster 813 ot a modern solar installation controller that controls the temperature of solar collectors and a maximum of two hot water t... celý popis
Product number:EUROSTER 813
Manufacturer:Euroster
Complete specification

Euroster 813

Euroster 813 ot a modern solar installation controller that controls the temperature of solar collectors and a maximum of two hot water tanks, depending on the selected operating mode. The device is able to control an additional heat source (boiler or electric heater) providing additional heating during periods when the energy obtained from the solar collector is insufficient. The user can program the time periods during which the additional heating is switched on. The controller can work in one of 4 modes, the list of available modes depends on the connection of sensors that are automatically detected when the power is turned on, which prevents the setting of an incorrect operating mode. The installation diagram for each mode is displayed on an ongoing basis on a clear display of the controller.

Advantages:

  • The controller is intended for the solar system
  • The ability to work in one of four modes (depending on the connection of sensors):
    • work with 1 container (2 sensors)
    • operation with 1 container and an additional electric heater (3 sensors)
    • operation with 1 storage tank and an external heating system (3 sensors)
    • operation with 2 storage tanks and a switching valve (3 sensors)
  • Automatic detection of connected sensors
  • Protection against setting the wrong operating mode
  • LCD display on which min. installation diagram for each of the operating modes
  • Supervision over the temperature of the solar collector and up to two tanks
  • Possibility to control an additional heat source (boiler or electric heater) providing additional heating at times when the energy obtained from the solar collector is insufficient

Technical parameters:

Controlled devicesolar system pumps, additional heat source
Supply voltage230 V 50 Hz
Maximum load on output A7 A 230 V 50 Hz
Maximum load on output B16 A 230 V 50 Hz
Power consumption0.8 watts
Regulator outputsrelay, voltage (230 V 50 Hz)
Temperature measurement range - collector sensorfrom -40 ° C to + 250 ° C
Temperature measurement range - tank sensorsfrom -10 ° C to + 110 ° C
Temperature adjustment rangefrom + 10 ° C to + 100 ° C
Accuracy of temperature control1 ° C
Accuracy of temperature indications1 ° C
Hysteresis range1 ° C - 20 ° C
Visual signalingbacklit LCD display, LED diodes
Working temperaturefrom + 5 ° C to + 45 ° C
Storage temperaturefrom -20 ° C to + 55 ° C
Level of securityIP 30
Colourwhite
Mounting methodwall-mounted, surface-mounted cabinet
Weight without cabinet161 g
Weight with cabinet293 g
Standards, approvals, certificatescompliance with EMC and LVD directives
Warranty2 years
Dimensions (width / height / depth) 52.5 mm/ 85 mm/ 61 mm (without cabinet)
EquipmentEuoster 813 controller, 3 temperature sensors, instruction, wall mounting bracket, surface-mounted cabinet, wall plugs

 

Download
Contact
Lenka Chobotova
- sales, orders

chobotova@atria.sk

Address
ATRIA Slovensko s.r.o.
P. Mudrona 5
010 01 Zilina
Slovakia
Contacts
Logo
ATRIA-Europe.com
Lenka Chobotova
2021 © atria-europe.com
Vytvorené na Eshop-rychlo.skEshop-rychlo.sk