Logo
0 items
za
Your shopping cart is empty
Potrebujete poradiť? Neváhajte nás kontaktovať.
  1. Úvod
  2. Manifolds and cabinets
  3. Stainless steel
  4. Stainless steel manifold for underfloor heating with circulating pump

Stainless steel manifold for underfloor heating with circulating pump

2 port manifold

Stainless steel manifold for underfloor heating with circulating pump Manifolds are made of high quality stainless steel according to the German stand... celý popis
Type
Product number:HM0035
Type:2 port manifold
Complete specification

Stainless steel manifold for underfloor heating with circulating pump

Manifolds are made of high quality stainless steel according to the German standard DIN EN 1264-4: 2009-11.

Manifolds can be used on all types of plastic pipes, including multilayer pipes and copper. The pipe is connected using a 3/4 "EK fitting.

Manifolds for underfloor heating are equipped with two-regulating flow meters with a flow indicator (Regolux 0-5 l / min) with memory and thermoregulating valves (with M30 x 1.5 connection) on each circuit so that each heating circuit can be regulated separately.

The manifold includes automatic vent valves, rotary drain valves and nickel-plated carriers.

Manifold specification:

  • automatic venting
  • connection of pipes 15, 16, 20 by means of compression fittings RCS 15, 16, 20
  • power: 25kW at ∆t 10k; 2.14 m3 / h
  • country of origin: Germany

Technical parameters - manifold:

  • purpose: heating and cooling systems
  • permissible liquid temperatures: -10 ° C to +120 ° C
  • max. permissible operating temperature: +80 ° C
  • max. permissible operating pressure: 6 bar
  • max. test pressure: 10 bar
  • measuring range: 0 - 5 l / min
  • flow rate: 2.14 m3 / h
  • material: brass, heat-resistant plastics, stainless steel 1.4301
  • seal: EPDM
  • measurement accuracy: ± 10%
  • thread: DIN ISO EN 228-1
  • liquids: water for heating, water for cooling, water mixtures with standard anti-corrosion antifreeze
  • fittings: Press-Messing Ms 58, nickel-plated
  • flat gasket: WS 3825
  • sound insulation: DIN 4109
  • recommended piping: PEX-AL-PEX 16 x 2
  • recommended connections compression fittings for pipes: ALPEX 16 x 2 ALU-EK
  • connection of branches: Ek, Euroconus
  • input and output connection: 1 "
  • flow meters: two-regulation with the possibility of locking

Technical parameters - pump: 

  • power based on speed (1 / 2 / 3): 46 / 67 / 93 W
  • maximum flow rate based on speed (1 / 2 / 3): 21 / 35 / 45 l / min
  • maximum discharge based on speed (1 / 2 / 3): 3 / 5 / 6 m
  • material: cast iron, top layer anti-corrosion enamel
  • bearing material: glass-ceramic
  • power supply: 230V / 50Hz
  • maximum line pressure: 10 bar
  • mounting length: 130 mm
  • pipe diameter: DN15
  • connecting thread - nut: 1 "/ 3/4", thread: 1 "
  • maximum temperature: 120 ° C

The set contains:

  • 3 speed pump Avansa 15-60/130
  • thermomanometer on the return
  • capillary thermometer
  • non-return valve
  • thermostatic valve head Oventrop
  • stainless steel manifold with brackets
  • automatic air vent
  • valves drain valves
  • flow meters with memory

The seller is not responsible for functional defects caused by impurities in the system. Therefore, before each operation of the heating system, we recommend thorough rinsing of the entire system according to the manufacturer's instructions.

Contact
Lenka Chobotova
- sales, orders

chobotova@atria.sk

Address
ATRIA Slovensko s.r.o.
P. Mudrona 5
010 01 Zilina
Slovakia
Contacts
Logo
ATRIA-Europe.com
Lenka Chobotova
2021 © atria-europe.com
Vytvorené na Eshop-rychlo.skEshop-rychlo.sk