Logo
0 items
za
Your shopping cart is empty
Potrebujete poradiť? Neváhajte nás kontaktovať.
  1. Úvod
  2. Thermostats
  3. Controllers / Regulators
  4. Programmable thermostat EUROSTER 11 M to control a central heating system mixing valve actuator and circulation pump

Programmable thermostat EUROSTER 11 M to control a central heating system mixing valve actuator and circulation pump

Euroster 11 M  Euroster 11M is a programmable controller for cooperation with a mixer and servomotor as well as a central heating circulation pump. In... celý popis
Product number:EUROSTER 11 M
Manufacturer:Euroster
Complete specification

Euroster 11 M 

Euroster 11M is a programmable controller for cooperation with a mixer and servomotor as well as a central heating circulation pump. In a central heating installation with a coal boiler, the controller automatically maintains a constant flow temperature or controls the valve and maintains a constant return temperature. Setting the optimal return temperature prevents the boiler from getting wet during water heating and increases its service life. The controller function is selected by software. In the central heating installation with a coal boiler, the regulator switches off the circulating pump after the boiler flame goes out. Euroster 11M has a pump stop protection system Anti Stop, which prevents the seizing process of the unused pump impeller. After the end of the heating season, the system automatically starts the pump every two weeks for 30 seconds (for the system to work after the season, the controller should be left turned on).

Advantages:

  • The device is designed to work with a 3-way valve with servomotor and central heating circulation pump (the mixer servomotor must be equipped with limit switches).
  • Controlling the central heating circulation pump (based on the set flow temperature) or controlling the 3-way valve (based on the set return temperature) allows you to maintain a constant temperature in the central heating system
  • The optimal return temperature prevents the boiler from getting wet during water heating, which increases its service life
  • Driver function selected by software
  • Cooperation with a room regulator
  • Frost protection
  • Protection against overheating of water in the central heating system and the boiler
  • Pump and valve operation test
  • Correction of temperature indications
  • The Anti Stop System, which prevents the seizing process of the unused pump impeller, which starts the circulation pump (also outside the heating season) for approx. 30 seconds every 14 days

Technical parameters:

Controlled devicemixing valve actuator, heating circulation pump
Supply voltage230 V 50 Hz
Power consumption1.6 watts
Maximum output load3 A 230 V 50 Hz
Temperature measurement rangefrom -5 ° C to + 110 ° C
Temperature adjustment rangefrom + 20 ° C to + 70 ° C
Temperature regulation range - circulation temperature regulation modefrom + 10 ° C to + 70 ° C
Accuracy of temperature control1 ° C
Hysteresis range2 ° C - 10 ° C
Visual signalingbacklit LCD display
Working temperaturefrom + 5 ° C to + 40 ° C
Storage temperaturefrom 0 ° C to 65 ° C
Level of securityIP 40
Colourblack
Mounting methodwall, wall plugs
Mass0.76 kg
Standards, approvals, certificatescompliance with EMC and LVD directives
Warranty2 years
Dimensions (width / height / depth)150 mm/90 mm/52 mm
EquipmentEuroster 11M controller, wall plugs, manual, mounting template, sensor bands

 

Download
Contact
Lenka Chobotova
- sales, orders

chobotova@atria.sk

Address
ATRIA Slovensko s.r.o.
P. Mudrona 5
010 01 Zilina
Slovakia
Contacts
Logo
ATRIA-Europe.com
Lenka Chobotova
2021 © atria-europe.com
Vytvorené na Eshop-rychlo.skEshop-rychlo.sk