Logo
0 items
za
Your shopping cart is empty
Potrebujete poradiť? Neváhajte nás kontaktovať.
  1. Úvod
  2. Thermostats
  3. Controllers / Regulators
  4. Programmable thermostat EUROSTER 11 E to control a central heating system pump or DHW system pump

Programmable thermostat EUROSTER 11 E to control a central heating system pump or DHW system pump

Euroster 11 E  Euroster 11E is an electronic, programmable controller, designed to work with a central heating circulation pump or a pump filling the ... celý popis
Product number:EUROSTER 11 E
Manufacturer:Euroster
Complete specification

Euroster 11 E 

Euroster 11E is an electronic, programmable controller, designed to work with a central heating circulation pump or a pump filling the domestic hot water tank. In the mode of operation with a central heating pump, the controller - pump assembly is intended for forcing water circulation with a coal or gas boiler (without a pump control system). The sensor used in the regulator measures the water temperature at the heating system flow. In the central heating installation with a coal boiler, the regulator switches off the circulation pump after the boiler flame goes out. In the mode of operation with the domestic hot water pump, the controller maintains a constant water temperature in the tank or in the domestic hot water system. The controller is equipped with Anti Stop pump protection system, which prevents the seizing process of the unused pump impeller. After the end of the heating season, the system automatically starts the pump every two weeks for 30 seconds (for the system to work after the season, the controller should be left turned on).

Advantages:

  • A device for controlling the central heating circulation pump or pump charging the domestic hot water tank in heating installations
  • Software mode of selecting the type of controlled pump
  • Test output switching function
  • Automatic activation and deactivation of the circulation pump according to the set central heating temperature
  • Supervision over maintaining a constant water temperature for the domestic hot water tank
  • Cooperation with circulation pamphas for solid or gas boilers (without pump control system)
  • Temperature measurement using a sensor that measures the water temperature at the heating flow or in the water heater
  • In the central heating installation with a solid fuel boiler, the regulator will switch off the circulation pump after the boiler flame has extinguished.
  • Setting the temperature above the dew point prevents the boiler from sweating during heating the water in central heating
  • The Anti Stop System, which prevents the seizing process of the unused pump impeller, which starts the circulation pump (also outside the heating season) for approx. 30 seconds every 14 days

Technical parameters:

Controlled devicecentral heating or domestic hot water pump
Supply voltage230 V 50 Hz
Maximum output load3 A 230 V 50 Hz
Power consumption1.6 watts
Temperature measurement rangefrom -5 ° C to + 120 ° C
Temperature adjustment rangefrom + 10 ° C to + 80 ° C
Accuracy of temperature control1 ° C
Hysteresis range2 ° C - 10 ° C
Visual signalingbacklit LCD display
Working temperaturefrom + 5 ° C to + 40 ° C
Storage temperaturefrom 0 ° C to + 65 ° C
Level of securityIP 40
Colourblack
Mounting methodwall, wall plugs
Driver mass with cables0.54 kg
Standards, approvals, certificatescompliance with EMC and LVD directives
Warranty2 years
Dimensions (width / height / depth)150 mm/90 mm/52 mm
EquipmentEuroster 11E controller, wall plugs, manual, mounting template, sensor band
Download
Contact
Lenka Chobotova
- sales, orders

chobotova@atria.sk

Address
ATRIA Slovensko s.r.o.
P. Mudrona 5
010 01 Zilina
Slovakia
Contacts
Logo
ATRIA-Europe.com
Lenka Chobotova
2021 © atria-europe.com
Vytvorené na Eshop-rychlo.skEshop-rychlo.sk